This file contains any messages produced by compilers while running configure, to aid debugging if configure makes a mistake. It was created by aMule configure SVN, which was generated by GNU Autoconf 2.59. Invocation command line was $ ./configure --enable-amulecmd --enable-debug --enable-optimize --enable-amule-daemon --enable-nls --enable-webserver --disable-cas --disable-alcc --enable-amule-gui --with-wx-config=../wxMac-2.8.7/build/wx-config --disable-dependency-tracking CFLAGS=-arch ppc -arch i386 -isysroot /Developer/SDKs/MacOSX10.4u.sdk CXXFLAGS=-arch ppc -arch i386 -isysroot /Developer/SDKs/MacOSX10.5.sdk --with-crypto-prefix=/usr/local/cryptopp --with-zlib ## --------- ## ## Platform. ## ## --------- ## hostname = samir-greadlys-computer.local uname -m = i386 uname -r = 9.2.2 uname -s = Darwin uname -v = Darwin Kernel Version 9.2.2: Tue Mar 4 21:17:34 PST 2008; root:xnu-1228.4.31~1/RELEASE_I386 /usr/bin/uname -p = i386 /bin/uname -X = unknown /bin/arch = unknown /usr/bin/arch -k = unknown /usr/convex/getsysinfo = unknown hostinfo = Mach kernel version: Darwin Kernel Version 9.2.2: Tue Mar 4 21:17:34 PST 2008; root:xnu-1228.4.31~1/RELEASE_I386 Kernel configured for up to 2 processors. 2 processors are physically available. 2 processors are logically available. Processor type: i486 (Intel 80486) Processors active: 0 1 Primary memory available: 4.00 gigabytes Default processor set: 80 tasks, 317 threads, 2 processors Load average: 1.02, Mach factor: 1.27 /bin/machine = unknown /usr/bin/oslevel = unknown /bin/universe = unknown PATH: /bin PATH: /sbin PATH: /usr/bin PATH: /usr/sbin PATH: /usr/local/bin PATH: /usr/local/mysql/bin PATH: /usr/local/bin ## ----------- ## ## Core tests. ## ## ----------- ## configure:1446: checking build system type configure:1464: result: i686-apple-darwin9.2.2 configure:1472: checking host system type configure:1486: result: i686-apple-darwin9.2.2 configure:1508: checking for a BSD-compatible install configure:1563: result: /usr/bin/install -c configure:1574: checking whether build environment is sane configure:1617: result: yes configure:1682: checking for gawk configure:1711: result: no configure:1682: checking for mawk configure:1711: result: no configure:1682: checking for nawk configure:1711: result: no configure:1682: checking for awk configure:1698: found /usr/bin/awk configure:1708: result: awk configure:1718: checking whether make sets $(MAKE) configure:1738: result: yes configure:1910: checking whether to enable maintainer-specific portions of Makefiles configure:1919: result: no configure:2026: checking for g++ configure:2042: found /usr/bin/g++ configure:2052: result: g++ configure:2068: checking for C++ compiler version configure:2071: g++ --version &5 i686-apple-darwin9-g++-4.0.1 (GCC) 4.0.1 (Apple Inc. build 5465) Copyright (C) 2005 Free Software Foundation, Inc. This is free software; see the source for copying conditions. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. configure:2074: $? = 0 configure:2076: g++ -v &5 Using built-in specs. Target: i686-apple-darwin9 Configured with: /var/tmp/gcc/gcc-5465~16/src/configure --disable-checking -enable-werror --prefix=/usr --mandir=/share/man --enable-languages=c,objc,c++,obj-c++ --program-transform-name=/^[cg][^.-]*$/s/$/-4.0/ --with-gxx-include-dir=/include/c++/4.0.0 --with-slibdir=/usr/lib --build=i686-apple-darwin9 --with-arch=apple --with-tune=generic --host=i686-apple-darwin9 --target=i686-apple-darwin9 Thread model: posix gcc version 4.0.1 (Apple Inc. build 5465) configure:2079: $? = 0 configure:2081: g++ -V &5 g++-4.0: argument to `-V' is missing configure:2084: $? = 1 configure:2107: checking for C++ compiler default output file name configure:2110: g++ -arch ppc -arch i386 -isysroot /Developer/SDKs/MacOSX10.5.sdk -L/usr/lib -L/lib -bind_at_load conftest.cc >&5 configure:2113: $? = 0 configure:2159: result: a.out configure:2164: checking whether the C++ compiler works configure:2170: ./a.out configure:2173: $? = 0 configure:2190: result: yes configure:2197: checking whether we are cross compiling configure:2199: result: no configure:2202: checking for suffix of executables configure:2204: g++ -o conftest -arch ppc -arch i386 -isysroot /Developer/SDKs/MacOSX10.5.sdk -L/usr/lib -L/lib -bind_at_load conftest.cc >&5 configure:2207: $? = 0 configure:2232: result: configure:2238: checking for suffix of object files configure:2259: g++ -c -arch ppc -arch i386 -isysroot /Developer/SDKs/MacOSX10.5.sdk conftest.cc >&5 configure:2262: $? = 0 configure:2284: result: o configure:2288: checking whether we are using the GNU C++ compiler configure:2312: g++ -c -arch ppc -arch i386 -isysroot /Developer/SDKs/MacOSX10.5.sdk conftest.cc >&5 configure:2318: $? = 0 configure:2322: test -z || test ! -s conftest.err configure:2325: $? = 0 configure:2328: test -s conftest.o configure:2331: $? = 0 configure:2344: result: yes configure:2350: checking whether g++ accepts -g configure:2371: g++ -c -g conftest.cc >&5 configure:2377: $? = 0 configure:2381: test -z || test ! -s conftest.err configure:2384: $? = 0 configure:2387: test -s conftest.o configure:2390: $? = 0 configure:2401: result: yes configure:2443: g++ -c -arch ppc -arch i386 -isysroot /Developer/SDKs/MacOSX10.5.sdk conftest.cc >&5 configure:2449: $? = 0 configure:2453: test -z || test ! -s conftest.err configure:2456: $? = 0 configure:2459: test -s conftest.o configure:2462: $? = 0 configure:2488: g++ -c -arch ppc -arch i386 -isysroot /Developer/SDKs/MacOSX10.5.sdk conftest.cc >&5 conftest.cc: In function 'int main()': conftest.cc:15: error: 'exit' was not declared in this scope conftest.cc: In function 'int main()': conftest.cc:15: error: 'exit' was not declared in this scope lipo: can't figure out the architecture type of: /var/folders/S9/S97oLIIrFR0LyKKUzS3t7E+++TI/-Tmp-//ccShfWHK.out configure:2494: $? = 1 configure: failed program was: | /* confdefs.h. */ | | #define PACKAGE_NAME "aMule" | #define PACKAGE_TARNAME "amule" | #define PACKAGE_VERSION "SVN" | #define PACKAGE_STRING "aMule SVN" | #define PACKAGE_BUGREPORT "admin@amule.org" | #define PACKAGE "amule" | #define VERSION "SVN" | /* end confdefs.h. */ | | int | main () | { | exit (42); | ; | return 0; | } configure:2443: g++ -c -arch ppc -arch i386 -isysroot /Developer/SDKs/MacOSX10.5.sdk conftest.cc >&5 /Developer/SDKs/MacOSX10.5.sdk/usr/include/stdlib.h:159: error: declaration of 'void std::exit(int)' throws different exceptions conftest.cc:11: error: than previous declaration 'void std::exit(int) throw ()' /Developer/SDKs/MacOSX10.5.sdk/usr/include/stdlib.h:159: error: declaration of 'void std::exit(int)' throws different exceptions conftest.cc:11: error: than previous declaration 'void std::exit(int) throw ()' lipo: can't figure out the architecture type of: /var/folders/S9/S97oLIIrFR0LyKKUzS3t7E+++TI/-Tmp-//ccDLaace.out configure:2449: $? = 1 configure: failed program was: | /* confdefs.h. */ | | #define PACKAGE_NAME "aMule" | #define PACKAGE_TARNAME "amule" | #define PACKAGE_VERSION "SVN" | #define PACKAGE_STRING "aMule SVN" | #define PACKAGE_BUGREPORT "admin@amule.org" | #define PACKAGE "amule" | #define VERSION "SVN" | /* end confdefs.h. */ | extern "C" void std::exit (int) throw (); using std::exit; | #include | int | main () | { | exit (42); | ; | return 0; | } configure:2443: g++ -c -arch ppc -arch i386 -isysroot /Developer/SDKs/MacOSX10.5.sdk conftest.cc >&5 configure:2449: $? = 0 configure:2453: test -z || test ! -s conftest.err configure:2456: $? = 0 configure:2459: test -s conftest.o configure:2462: $? = 0 configure:2488: g++ -c -arch ppc -arch i386 -isysroot /Developer/SDKs/MacOSX10.5.sdk conftest.cc >&5 configure:2494: $? = 0 configure:2498: test -z || test ! -s conftest.err configure:2501: $? = 0 configure:2504: test -s conftest.o configure:2507: $? = 0 configure:2541: checking for style of include used by make configure:2569: result: GNU configure:2597: checking dependency style of g++ configure:2687: result: none configure:2709: checking how to run the C++ preprocessor configure:2740: g++ -E conftest.cc configure:2746: $? = 0 configure:2778: g++ -E conftest.cc conftest.cc:14:28: error: ac_nonexistent.h: No such file or directory configure:2784: $? = 1 configure: failed program was: | /* confdefs.h. */ | | #define PACKAGE_NAME "aMule" | #define PACKAGE_TARNAME "amule" | #define PACKAGE_VERSION "SVN" | #define PACKAGE_STRING "aMule SVN" | #define PACKAGE_BUGREPORT "admin@amule.org" | #define PACKAGE "amule" | #define VERSION "SVN" | #ifdef __cplusplus | extern "C" void std::exit (int); using std::exit; | #endif | /* end confdefs.h. */ | #include configure:2823: result: g++ -E configure:2847: g++ -E conftest.cc configure:2853: $? = 0 configure:2885: g++ -E conftest.cc conftest.cc:14:28: error: ac_nonexistent.h: No such file or directory configure:2891: $? = 1 configure: failed program was: | /* confdefs.h. */ | | #define PACKAGE_NAME "aMule" | #define PACKAGE_TARNAME "amule" | #define PACKAGE_VERSION "SVN" | #define PACKAGE_STRING "aMule SVN" | #define PACKAGE_BUGREPORT "admin@amule.org" | #define PACKAGE "amule" | #define VERSION "SVN" | #ifdef __cplusplus | extern "C" void std::exit (int); using std::exit; | #endif | /* end confdefs.h. */ | #include configure:2980: checking for gcc configure:2996: found /usr/bin/gcc configure:3006: result: gcc configure:3250: checking for C compiler version configure:3253: gcc --version &5 i686-apple-darwin9-gcc-4.0.1 (GCC) 4.0.1 (Apple Inc. build 5465) Copyright (C) 2005 Free Software Foundation, Inc. This is free software; see the source for copying conditions. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. configure:3256: $? = 0 configure:3258: gcc -v &5 Using built-in specs. Target: i686-apple-darwin9 Configured with: /var/tmp/gcc/gcc-5465~16/src/configure --disable-checking -enable-werror --prefix=/usr --mandir=/share/man --enable-languages=c,objc,c++,obj-c++ --program-transform-name=/^[cg][^.-]*$/s/$/-4.0/ --with-gxx-include-dir=/include/c++/4.0.0 --with-slibdir=/usr/lib --build=i686-apple-darwin9 --with-arch=apple --with-tune=generic --host=i686-apple-darwin9 --target=i686-apple-darwin9 Thread model: posix gcc version 4.0.1 (Apple Inc. build 5465) configure:3261: $? = 0 configure:3263: gcc -V &5 gcc-4.0: argument to `-V' is missing configure:3266: $? = 1 configure:3269: checking whether we are using the GNU C compiler configure:3293: gcc -c -arch ppc -arch i386 -isysroot /Developer/SDKs/MacOSX10.4u.sdk -no-cpp-precomp -D_INTL_REDIRECT_MACROS -DNOPCH conftest.c >&5 configure:3299: $? = 0 configure:3303: test -z || test ! -s conftest.err configure:3306: $? = 0 configure:3309: test -s conftest.o configure:3312: $? = 0 configure:3325: result: yes configure:3331: checking whether gcc accepts -g configure:3352: gcc -c -g conftest.c >&5 configure:3358: $? = 0 configure:3362: test -z || test ! -s conftest.err configure:3365: $? = 0 configure:3368: test -s conftest.o configure:3371: $? = 0 configure:3382: result: yes configure:3399: checking for gcc option to accept ANSI C configure:3469: gcc -c -arch ppc -arch i386 -isysroot /Developer/SDKs/MacOSX10.4u.sdk -no-cpp-precomp -D_INTL_REDIRECT_MACROS -DNOPCH conftest.c >&5 configure:3475: $? = 0 configure:3479: test -z || test ! -s conftest.err configure:3482: $? = 0 configure:3485: test -s conftest.o configure:3488: $? = 0 configure:3506: result: none needed configure:3524: gcc -c -arch ppc -arch i386 -isysroot /Developer/SDKs/MacOSX10.4u.sdk -no-cpp-precomp -D_INTL_REDIRECT_MACROS -DNOPCH conftest.c >&5 conftest.c:2: error: syntax error before 'me' conftest.c:2: error: syntax error before 'me' lipo: can't figure out the architecture type of: /var/folders/S9/S97oLIIrFR0LyKKUzS3t7E+++TI/-Tmp-//ccemCmUF.out configure:3530: $? = 1 configure: failed program was: | #ifndef __cplusplus | choke me | #endif configure:3665: checking dependency style of gcc configure:3755: result: none configure:3777: checking how to run the C preprocessor configure:3812: gcc -E conftest.c configure:3818: $? = 0 configure:3850: gcc -E conftest.c conftest.c:14:28: error: ac_nonexistent.h: No such file or directory configure:3856: $? = 1 configure: failed program was: | /* confdefs.h. */ | | #define PACKAGE_NAME "aMule" | #define PACKAGE_TARNAME "amule" | #define PACKAGE_VERSION "SVN" | #define PACKAGE_STRING "aMule SVN" | #define PACKAGE_BUGREPORT "admin@amule.org" | #define PACKAGE "amule" | #define VERSION "SVN" | #ifdef __cplusplus | extern "C" void std::exit (int); using std::exit; | #endif | /* end confdefs.h. */ | #include configure:3895: result: gcc -E configure:3919: gcc -E conftest.c configure:3925: $? = 0 configure:3957: gcc -E conftest.c conftest.c:14:28: error: ac_nonexistent.h: No such file or directory configure:3963: $? = 1 configure: failed program was: | /* confdefs.h. */ | | #define PACKAGE_NAME "aMule" | #define PACKAGE_TARNAME "amule" | #define PACKAGE_VERSION "SVN" | #define PACKAGE_STRING "aMule SVN" | #define PACKAGE_BUGREPORT "admin@amule.org" | #define PACKAGE "amule" | #define VERSION "SVN" | #ifdef __cplusplus | extern "C" void std::exit (int); using std::exit; | #endif | /* end confdefs.h. */ | #include configure:4010: checking for gawk configure:4036: result: awk configure:4557: checking for egrep configure:4567: result: grep -E configure:4572: checking whether make sets $(MAKE) configure:4592: result: yes configure:4606: checking for flex configure:4622: found /usr/bin/flex configure:4632: result: flex configure:4645: checking for yywrap in -lfl configure:4675: gcc -o conftest -arch ppc -arch i386 -isysroot /Developer/SDKs/MacOSX10.4u.sdk -no-cpp-precomp -D_INTL_REDIRECT_MACROS -DNOPCH -L/usr/lib -L/lib -bind_at_load conftest.c -lfl >&5 ld: library not found for -lcrt1.10.5.o collect2: ld returned 1 exit status ld: library not found for -lcrt1.10.5.o collect2: ld returned 1 exit status lipo: can't open input file: /var/folders/S9/S97oLIIrFR0LyKKUzS3t7E+++TI/-Tmp-//ccPBfr4Y.out (No such file or directory) configure:4681: $? = 1 configure: failed program was: | /* confdefs.h. */ | | #define PACKAGE_NAME "aMule" | #define PACKAGE_TARNAME "amule" | #define PACKAGE_VERSION "SVN" | #define PACKAGE_STRING "aMule SVN" | #define PACKAGE_BUGREPORT "admin@amule.org" | #define PACKAGE "amule" | #define VERSION "SVN" | #ifdef __cplusplus | extern "C" void std::exit (int); using std::exit; | #endif | /* end confdefs.h. */ | | /* Override any gcc2 internal prototype to avoid an error. */ | #ifdef __cplusplus | extern "C" | #endif | /* We use char because int might match the return type of a gcc2 | builtin and then its argument prototype would still apply. */ | char yywrap (); | int | main () | { | yywrap (); | ; | return 0; | } configure:4707: result: no configure:4712: checking for yywrap in -ll configure:4742: gcc -o conftest -arch ppc -arch i386 -isysroot /Developer/SDKs/MacOSX10.4u.sdk -no-cpp-precomp -D_INTL_REDIRECT_MACROS -DNOPCH -L/usr/lib -L/lib -bind_at_load conftest.c -ll >&5 ld: library not found for -lcrt1.10.5.o collect2: ld returned 1 exit status ld: library not found for -lcrt1.10.5.o collect2: ld returned 1 exit status lipo: can't open input file: /var/folders/S9/S97oLIIrFR0LyKKUzS3t7E+++TI/-Tmp-//ccXVZ9oh.out (No such file or directory) configure:4748: $? = 1 configure: failed program was: | /* confdefs.h. */ | | #define PACKAGE_NAME "aMule" | #define PACKAGE_TARNAME "amule" | #define PACKAGE_VERSION "SVN" | #define PACKAGE_STRING "aMule SVN" | #define PACKAGE_BUGREPORT "admin@amule.org" | #define PACKAGE "amule" | #define VERSION "SVN" | #ifdef __cplusplus | extern "C" void std::exit (int); using std::exit; | #endif | /* end confdefs.h. */ | | /* Override any gcc2 internal prototype to avoid an error. */ | #ifdef __cplusplus | extern "C" | #endif | /* We use char because int might match the return type of a gcc2 | builtin and then its argument prototype would still apply. */ | char yywrap (); | int | main () | { | yywrap (); | ; | return 0; | } configure:4774: result: no configure:4785: checking lex output file root configure:4796: flex conftest.l configure:4799: $? = 0 configure:4811: result: lex.yy configure:4816: checking whether yytext is a pointer configure:4832: gcc -o conftest -arch ppc -arch i386 -isysroot /Developer/SDKs/MacOSX10.4u.sdk -no-cpp-precomp -D_INTL_REDIRECT_MACROS -DNOPCH -L/usr/lib -L/lib -bind_at_load conftest.c >&5 ld: library not found for -lcrt1.10.5.o collect2: ld returned 1 exit status ld: library not found for -lcrt1.10.5.o collect2: ld returned 1 exit status lipo: can't open input file: /var/folders/S9/S97oLIIrFR0LyKKUzS3t7E+++TI/-Tmp-//cctWg7xA.out (No such file or directory) configure:4838: $? = 1 configure: failed program was: | | #line 3 "lex.yy.c" | | #define YY_INT_ALIGNED short int | | /* A lexical scanner generated by flex */ | | #define FLEX_SCANNER | #define YY_FLEX_MAJOR_VERSION 2 | #define YY_FLEX_MINOR_VERSION 5 | #define YY_FLEX_SUBMINOR_VERSION 33 | #if YY_FLEX_SUBMINOR_VERSION > 0 | #define FLEX_BETA | #endif | | /* First, we deal with platform-specific or compiler-specific issues. */ | | /* begin standard C headers. */ | #include | #include | #include | #include | | /* end standard C headers. */ | | /* flex integer type definitions */ | | #ifndef FLEXINT_H | #define FLEXINT_H | | /* C99 systems have . Non-C99 systems may or may not. */ | | #if __STDC_VERSION__ >= 199901L | | /* C99 says to define __STDC_LIMIT_MACROS before including stdint.h, | * if you want the limit (max/min) macros for int types. | */ | #ifndef __STDC_LIMIT_MACROS | #define __STDC_LIMIT_MACROS 1 | #endif | | #include | typedef int8_t flex_int8_t; | typedef uint8_t flex_uint8_t; | typedef int16_t flex_int16_t; | typedef uint16_t flex_uint16_t; | typedef int32_t flex_int32_t; | typedef uint32_t flex_uint32_t; | #else | typedef signed char flex_int8_t; | typedef short int flex_int16_t; | typedef int flex_int32_t; | typedef unsigned char flex_uint8_t; | typedef unsigned short int flex_uint16_t; | typedef unsigned int flex_uint32_t; | #endif /* ! C99 */ | | /* Limits of integral types. */ | #ifndef INT8_MIN | #define INT8_MIN (-128) | #endif | #ifndef INT16_MIN | #define INT16_MIN (-32767-1) | #endif | #ifndef INT32_MIN | #define INT32_MIN (-2147483647-1) | #endif | #ifndef INT8_MAX | #define INT8_MAX (127) | #endif | #ifndef INT16_MAX | #define INT16_MAX (32767) | #endif | #ifndef INT32_MAX | #define INT32_MAX (2147483647) | #endif | #ifndef UINT8_MAX | #define UINT8_MAX (255U) | #endif | #ifndef UINT16_MAX | #define UINT16_MAX (65535U) | #endif | #ifndef UINT32_MAX | #define UINT32_MAX (4294967295U) | #endif | | #endif /* ! FLEXINT_H */ | | #ifdef __cplusplus | | /* The "const" storage-class-modifier is valid. */ | #define YY_USE_CONST | | #else /* ! __cplusplus */ | | #if __STDC__ | | #define YY_USE_CONST | | #endif /* __STDC__ */ | #endif /* ! __cplusplus */ | | #ifdef YY_USE_CONST | #define yyconst const | #else | #define yyconst | #endif | | /* Returned upon end-of-file. */ | #define YY_NULL 0 | | /* Promotes a possibly negative, possibly signed char to an unsigned | * integer for use as an array index. If the signed char is negative, | * we want to instead treat it as an 8-bit unsigned char, hence the | * double cast. | */ | #define YY_SC_TO_UI(c) ((unsigned int) (unsigned char) c) | | /* Enter a start condition. This macro really ought to take a parameter, | * but we do it the disgusting crufty way forced on us by the ()-less | * definition of BEGIN. | */ | #define BEGIN (yy_start) = 1 + 2 * | | /* Translate the current start state into a value that can be later handed | * to BEGIN to return to the state. The YYSTATE alias is for lex | * compatibility. | */ | #define YY_START (((yy_start) - 1) / 2) | #define YYSTATE YY_START | | /* Action number for EOF rule of a given start state. */ | #define YY_STATE_EOF(state) (YY_END_OF_BUFFER + state + 1) | | /* Special action meaning "start processing a new file". */ | #define YY_NEW_FILE yyrestart(yyin ) | | #define YY_END_OF_BUFFER_CHAR 0 | | /* Size of default input buffer. */ | #ifndef YY_BUF_SIZE | #define YY_BUF_SIZE 16384 | #endif | | /* The state buf must be large enough to hold one state per character in the main buffer. | */ | #define YY_STATE_BUF_SIZE ((YY_BUF_SIZE + 2) * sizeof(yy_state_type)) | | #ifndef YY_TYPEDEF_YY_BUFFER_STATE | #define YY_TYPEDEF_YY_BUFFER_STATE | typedef struct yy_buffer_state *YY_BUFFER_STATE; | #endif | | extern int yyleng; | | extern FILE *yyin, *yyout; | | #define EOB_ACT_CONTINUE_SCAN 0 | #define EOB_ACT_END_OF_FILE 1 | #define EOB_ACT_LAST_MATCH 2 | | #define YY_LESS_LINENO(n) | | /* Return all but the first "n" matched characters back to the input stream. */ | #define yyless(n) \ | do \ | { \ | /* Undo effects of setting up yytext. */ \ | int yyless_macro_arg = (n); \ | YY_LESS_LINENO(yyless_macro_arg);\ | *yy_cp = (yy_hold_char); \ | YY_RESTORE_YY_MORE_OFFSET \ | (yy_c_buf_p) = yy_cp = yy_bp + yyless_macro_arg - YY_MORE_ADJ; \ | YY_DO_BEFORE_ACTION; /* set up yytext again */ \ | } \ | while ( 0 ) | | #define unput(c) yyunput( c, (yytext_ptr) ) | | /* The following is because we cannot portably get our hands on size_t | * (without autoconf's help, which isn't available because we want | * flex-generated scanners to compile on their own). | */ | | #ifndef YY_TYPEDEF_YY_SIZE_T | #define YY_TYPEDEF_YY_SIZE_T | typedef unsigned int yy_size_t; | #endif | | #ifndef YY_STRUCT_YY_BUFFER_STATE | #define YY_STRUCT_YY_BUFFER_STATE | struct yy_buffer_state | { | FILE *yy_input_file; | | char *yy_ch_buf; /* input buffer */ | char *yy_buf_pos; /* current position in input buffer */ | | /* Size of input buffer in bytes, not including room for EOB | * characters. | */ | yy_size_t yy_buf_size; | | /* Number of characters read into yy_ch_buf, not including EOB | * characters. | */ | int yy_n_chars; | | /* Whether we "own" the buffer - i.e., we know we created it, | * and can realloc() it to grow it, and should free() it to | * delete it. | */ | int yy_is_our_buffer; | | /* Whether this is an "interactive" input source; if so, and | * if we're using stdio for input, then we want to use getc() | * instead of fread(), to make sure we stop fetching input after | * each newline. | */ | int yy_is_interactive; | | /* Whether we're considered to be at the beginning of a line. | * If so, '^' rules will be active on the next match, otherwise | * not. | */ | int yy_at_bol; | | int yy_bs_lineno; /**< The line count. */ | int yy_bs_column; /**< The column count. */ | | /* Whether to try to fill the input buffer when we reach the | * end of it. | */ | int yy_fill_buffer; | | int yy_buffer_status; | | #define YY_BUFFER_NEW 0 | #define YY_BUFFER_NORMAL 1 | /* When an EOF's been seen but there's still some text to process | * then we mark the buffer as YY_EOF_PENDING, to indicate that we | * shouldn't try reading from the input source any more. We might | * still have a bunch of tokens to match, though, because of | * possible backing-up. | * | * When we actually see the EOF, we change the status to "new" | * (via yyrestart()), so that the user can continue scanning by | * just pointing yyin at a new input file. | */ | #define YY_BUFFER_EOF_PENDING 2 | | }; | #endif /* !YY_STRUCT_YY_BUFFER_STATE */ | | /* Stack of input buffers. */ | static size_t yy_buffer_stack_top = 0; /**< index of top of stack. */ | static size_t yy_buffer_stack_max = 0; /**< capacity of stack. */ | static YY_BUFFER_STATE * yy_buffer_stack = 0; /**< Stack as an array. */ | | /* We provide macros for accessing buffer states in case in the | * future we want to put the buffer states in a more general | * "scanner state". | * | * Returns the top of the stack, or NULL. | */ | #define YY_CURRENT_BUFFER ( (yy_buffer_stack) \ | ? (yy_buffer_stack)[(yy_buffer_stack_top)] \ | : NULL) | | /* Same as previous macro, but useful when we know that the buffer stack is not | * NULL or when we need an lvalue. For internal use only. | */ | #define YY_CURRENT_BUFFER_LVALUE (yy_buffer_stack)[(yy_buffer_stack_top)] | | /* yy_hold_char holds the character lost when yytext is formed. */ | static char yy_hold_char; | static int yy_n_chars; /* number of characters read into yy_ch_buf */ | int yyleng; | | /* Points to current character in buffer. */ | static char *yy_c_buf_p = (char *) 0; | static int yy_init = 0; /* whether we need to initialize */ | static int yy_start = 0; /* start state number */ | | /* Flag which is used to allow yywrap()'s to do buffer switches | * instead of setting up a fresh yyin. A bit of a hack ... | */ | static int yy_did_buffer_switch_on_eof; | | void yyrestart (FILE *input_file ); | void yy_switch_to_buffer (YY_BUFFER_STATE new_buffer ); | YY_BUFFER_STATE yy_create_buffer (FILE *file,int size ); | void yy_delete_buffer (YY_BUFFER_STATE b ); | void yy_flush_buffer (YY_BUFFER_STATE b ); | void yypush_buffer_state (YY_BUFFER_STATE new_buffer ); | void yypop_buffer_state (void ); | | static void yyensure_buffer_stack (void ); | static void yy_load_buffer_state (void ); | static void yy_init_buffer (YY_BUFFER_STATE b,FILE *file ); | | #define YY_FLUSH_BUFFER yy_flush_buffer(YY_CURRENT_BUFFER ) | | YY_BUFFER_STATE yy_scan_buffer (char *base,yy_size_t size ); | YY_BUFFER_STATE yy_scan_string (yyconst char *yy_str ); | YY_BUFFER_STATE yy_scan_bytes (yyconst char *bytes,int len ); | | void *yyalloc (yy_size_t ); | void *yyrealloc (void *,yy_size_t ); | void yyfree (void * ); | | #define yy_new_buffer yy_create_buffer | | #define yy_set_interactive(is_interactive) \ | { \ | if ( ! YY_CURRENT_BUFFER ){ \ | yyensure_buffer_stack (); \ | YY_CURRENT_BUFFER_LVALUE = \ | yy_create_buffer(yyin,YY_BUF_SIZE ); \ | } \ | YY_CURRENT_BUFFER_LVALUE->yy_is_interactive = is_interactive; \ | } | | #define yy_set_bol(at_bol) \ | { \ | if ( ! YY_CURRENT_BUFFER ){\ | yyensure_buffer_stack (); \ | YY_CURRENT_BUFFER_LVALUE = \ | yy_create_buffer(yyin,YY_BUF_SIZE ); \ | } \ | YY_CURRENT_BUFFER_LVALUE->yy_at_bol = at_bol; \ | } | | #define YY_AT_BOL() (YY_CURRENT_BUFFER_LVALUE->yy_at_bol) | | /* Begin user sect3 */ | | typedef unsigned char YY_CHAR; | | FILE *yyin = (FILE *) 0, *yyout = (FILE *) 0; | | typedef int yy_state_type; | | extern int yylineno; | | int yylineno = 1; | | extern char *yytext; | #define yytext_ptr yytext | | static yy_state_type yy_get_previous_state (void ); | static yy_state_type yy_try_NUL_trans (yy_state_type current_state ); | static int yy_get_next_buffer (void ); | static void yy_fatal_error (yyconst char msg[] ); | | /* Done after the current pattern has been matched and before the | * corresponding action - sets up yytext. | */ | #define YY_DO_BEFORE_ACTION \ | (yytext_ptr) = yy_bp; \ | yyleng = (size_t) (yy_cp - yy_bp); \ | (yy_hold_char) = *yy_cp; \ | *yy_cp = '\0'; \ | (yy_c_buf_p) = yy_cp; | | #define YY_NUM_RULES 1 | #define YY_END_OF_BUFFER 2 | /* This struct is not used in this scanner, | but its presence is necessary. */ | struct yy_trans_info | { | flex_int32_t yy_verify; | flex_int32_t yy_nxt; | }; | static yyconst flex_int16_t yy_accept[6] = | { 0, | 0, 0, 2, 1, 0 | } ; | | static yyconst flex_int32_t yy_ec[256] = | { 0, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1 | } ; | | static yyconst flex_int32_t yy_meta[2] = | { 0, | 1 | } ; | | static yyconst flex_int16_t yy_base[7] = | { 0, | 0, 0, 2, 3, 3, 0 | } ; | | static yyconst flex_int16_t yy_def[7] = | { 0, | 6, 6, 5, 5, 0, 5 | } ; | | static yyconst flex_int16_t yy_nxt[5] = | { 0, | 4, 5, 3, 5 | } ; | | static yyconst flex_int16_t yy_chk[5] = | { 0, | 6, 3, 5, 5 | } ; | | static yy_state_type yy_last_accepting_state; | static char *yy_last_accepting_cpos; | | extern int yy_flex_debug; | int yy_flex_debug = 0; | | /* The intent behind this definition is that it'll catch | * any uses of REJECT which flex missed. | */ | #define REJECT reject_used_but_not_detected | #define yymore() yymore_used_but_not_detected | #define YY_MORE_ADJ 0 | #define YY_RESTORE_YY_MORE_OFFSET | char *yytext; | #line 1 "conftest.l" | #line 453 "lex.yy.c" | | #define INITIAL 0 | | #ifndef YY_NO_UNISTD_H | /* Special case for "unistd.h", since it is non-ANSI. We include it way | * down here because we want the user's section 1 to have been scanned first. | * The user has a chance to override it with an option. | */ | #include | #endif | | #ifndef YY_EXTRA_TYPE | #define YY_EXTRA_TYPE void * | #endif | | static int yy_init_globals (void ); | | /* Macros after this point can all be overridden by user definitions in | * section 1. | */ | | #ifndef YY_SKIP_YYWRAP | #ifdef __cplusplus | extern "C" int yywrap (void ); | #else | extern int yywrap (void ); | #endif | #endif | | static void yyunput (int c,char *buf_ptr ); | | #ifndef yytext_ptr | static void yy_flex_strncpy (char *,yyconst char *,int ); | #endif | | #ifdef YY_NEED_STRLEN | static int yy_flex_strlen (yyconst char * ); | #endif | | #ifndef YY_NO_INPUT | | #ifdef __cplusplus | static int yyinput (void ); | #else | static int input (void ); | #endif | | #endif | | /* Amount of stuff to slurp up with each read. */ | #ifndef YY_READ_BUF_SIZE | #define YY_READ_BUF_SIZE 8192 | #endif | | /* Copy whatever the last rule matched to the standard output. */ | #ifndef ECHO | /* This used to be an fputs(), but since the string might contain NUL's, | * we now use fwrite(). | */ | #define ECHO (void) fwrite( yytext, yyleng, 1, yyout ) | #endif | | /* Gets input and stuffs it into "buf". number of characters read, or YY_NULL, | * is returned in "result". | */ | #ifndef YY_INPUT | #define YY_INPUT(buf,result,max_size) \ | if ( YY_CURRENT_BUFFER_LVALUE->yy_is_interactive ) \ | { \ | int c = '*'; \ | size_t n; \ | for ( n = 0; n < max_size && \ | (c = getc( yyin )) != EOF && c != '\n'; ++n ) \ | buf[n] = (char) c; \ | if ( c == '\n' ) \ | buf[n++] = (char) c; \ | if ( c == EOF && ferror( yyin ) ) \ | YY_FATAL_ERROR( "input in flex scanner failed" ); \ | result = n; \ | } \ | else \ | { \ | errno=0; \ | while ( (result = fread(buf, 1, max_size, yyin))==0 && ferror(yyin)) \ | { \ | if( errno != EINTR) \ | { \ | YY_FATAL_ERROR( "input in flex scanner failed" ); \ | break; \ | } \ | errno=0; \ | clearerr(yyin); \ | } \ | }\ | \ | | #endif | | /* No semi-colon after return; correct usage is to write "yyterminate();" - | * we don't want an extra ';' after the "return" because that will cause | * some compilers to complain about unreachable statements. | */ | #ifndef yyterminate | #define yyterminate() return YY_NULL | #endif | | /* Number of entries by which start-condition stack grows. */ | #ifndef YY_START_STACK_INCR | #define YY_START_STACK_INCR 25 | #endif | | /* Report a fatal error. */ | #ifndef YY_FATAL_ERROR | #define YY_FATAL_ERROR(msg) yy_fatal_error( msg ) | #endif | | /* end tables serialization structures and prototypes */ | | /* Default declaration of generated scanner - a define so the user can | * easily add parameters. | */ | #ifndef YY_DECL | #define YY_DECL_IS_OURS 1 | | extern int yylex (void); | | #define YY_DECL int yylex (void) | #endif /* !YY_DECL */ | | /* Code executed at the beginning of each rule, after yytext and yyleng | * have been set up. | */ | #ifndef YY_USER_ACTION | #define YY_USER_ACTION | #endif | | /* Code executed at the end of each rule. */ | #ifndef YY_BREAK | #define YY_BREAK break; | #endif | | #define YY_RULE_SETUP \ | YY_USER_ACTION | | /** The main scanner function which does all the work. | */ | YY_DECL | { | register yy_state_type yy_current_state; | register char *yy_cp, *yy_bp; | register int yy_act; | | #line 1 "conftest.l" | | #line 608 "lex.yy.c" | | if ( !(yy_init) ) | { | (yy_init) = 1; | | #ifdef YY_USER_INIT | YY_USER_INIT; | #endif | | if ( ! (yy_start) ) | (yy_start) = 1; /* first start state */ | | if ( ! yyin ) | yyin = stdin; | | if ( ! yyout ) | yyout = stdout; | | if ( ! YY_CURRENT_BUFFER ) { | yyensure_buffer_stack (); | YY_CURRENT_BUFFER_LVALUE = | yy_create_buffer(yyin,YY_BUF_SIZE ); | } | | yy_load_buffer_state( ); | } | | while ( 1 ) /* loops until end-of-file is reached */ | { | yy_cp = (yy_c_buf_p); | | /* Support of yytext. */ | *yy_cp = (yy_hold_char); | | /* yy_bp points to the position in yy_ch_buf of the start of | * the current run. | */ | yy_bp = yy_cp; | | yy_current_state = (yy_start); | yy_match: | do | { | register YY_CHAR yy_c = yy_ec[YY_SC_TO_UI(*yy_cp)]; | if ( yy_accept[yy_current_state] ) | { | (yy_last_accepting_state) = yy_current_state; | (yy_last_accepting_cpos) = yy_cp; | } | while ( yy_chk[yy_base[yy_current_state] + yy_c] != yy_current_state ) | { | yy_current_state = (int) yy_def[yy_current_state]; | if ( yy_current_state >= 6 ) | yy_c = yy_meta[(unsigned int) yy_c]; | } | yy_current_state = yy_nxt[yy_base[yy_current_state] + (unsigned int) yy_c]; | ++yy_cp; | } | while ( yy_base[yy_current_state] != 3 ); | | yy_find_action: | yy_act = yy_accept[yy_current_state]; | if ( yy_act == 0 ) | { /* have to back up */ | yy_cp = (yy_last_accepting_cpos); | yy_current_state = (yy_last_accepting_state); | yy_act = yy_accept[yy_current_state]; | } | | YY_DO_BEFORE_ACTION; | | do_action: /* This label is used only to access EOF actions. */ | | switch ( yy_act ) | { /* beginning of action switch */ | case 0: /* must back up */ | /* undo the effects of YY_DO_BEFORE_ACTION */ | *yy_cp = (yy_hold_char); | yy_cp = (yy_last_accepting_cpos); | yy_current_state = (yy_last_accepting_state); | goto yy_find_action; | | case 1: | YY_RULE_SETUP | #line 2 "conftest.l" | ECHO; | YY_BREAK | #line 696 "lex.yy.c" | case YY_STATE_EOF(INITIAL): | yyterminate(); | | case YY_END_OF_BUFFER: | { | /* Amount of text matched not including the EOB char. */ | int yy_amount_of_matched_text = (int) (yy_cp - (yytext_ptr)) - 1; | | /* Undo the effects of YY_DO_BEFORE_ACTION. */ | *yy_cp = (yy_hold_char); | YY_RESTORE_YY_MORE_OFFSET | | if ( YY_CURRENT_BUFFER_LVALUE->yy_buffer_status == YY_BUFFER_NEW ) | { | /* We're scanning a new file or input source. It's | * possible that this happened because the user | * just pointed yyin at a new source and called | * yylex(). If so, then we have to assure | * consistency between YY_CURRENT_BUFFER and our | * globals. Here is the right place to do so, because | * this is the first action (other than possibly a | * back-up) that will match for the new input source. | */ | (yy_n_chars) = YY_CURRENT_BUFFER_LVALUE->yy_n_chars; | YY_CURRENT_BUFFER_LVALUE->yy_input_file = yyin; | YY_CURRENT_BUFFER_LVALUE->yy_buffer_status = YY_BUFFER_NORMAL; | } | | /* Note that here we test for yy_c_buf_p "<=" to the position | * of the first EOB in the buffer, since yy_c_buf_p will | * already have been incremented past the NUL character | * (since all states make transitions on EOB to the | * end-of-buffer state). Contrast this with the test | * in input(). | */ | if ( (yy_c_buf_p) <= &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars)] ) | { /* This was really a NUL. */ | yy_state_type yy_next_state; | | (yy_c_buf_p) = (yytext_ptr) + yy_amount_of_matched_text; | | yy_current_state = yy_get_previous_state( ); | | /* Okay, we're now positioned to make the NUL | * transition. We couldn't have | * yy_get_previous_state() go ahead and do it | * for us because it doesn't know how to deal | * with the possibility of jamming (and we don't | * want to build jamming into it because then it | * will run more slowly). | */ | | yy_next_state = yy_try_NUL_trans( yy_current_state ); | | yy_bp = (yytext_ptr) + YY_MORE_ADJ; | | if ( yy_next_state ) | { | /* Consume the NUL. */ | yy_cp = ++(yy_c_buf_p); | yy_current_state = yy_next_state; | goto yy_match; | } | | else | { | yy_cp = (yy_c_buf_p); | goto yy_find_action; | } | } | | else switch ( yy_get_next_buffer( ) ) | { | case EOB_ACT_END_OF_FILE: | { | (yy_did_buffer_switch_on_eof) = 0; | | if ( yywrap( ) ) | { | /* Note: because we've taken care in | * yy_get_next_buffer() to have set up | * yytext, we can now set up | * yy_c_buf_p so that if some total | * hoser (like flex itself) wants to | * call the scanner after we return the | * YY_NULL, it'll still work - another | * YY_NULL will get returned. | */ | (yy_c_buf_p) = (yytext_ptr) + YY_MORE_ADJ; | | yy_act = YY_STATE_EOF(YY_START); | goto do_action; | } | | else | { | if ( ! (yy_did_buffer_switch_on_eof) ) | YY_NEW_FILE; | } | break; | } | | case EOB_ACT_CONTINUE_SCAN: | (yy_c_buf_p) = | (yytext_ptr) + yy_amount_of_matched_text; | | yy_current_state = yy_get_previous_state( ); | | yy_cp = (yy_c_buf_p); | yy_bp = (yytext_ptr) + YY_MORE_ADJ; | goto yy_match; | | case EOB_ACT_LAST_MATCH: | (yy_c_buf_p) = | &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars)]; | | yy_current_state = yy_get_previous_state( ); | | yy_cp = (yy_c_buf_p); | yy_bp = (yytext_ptr) + YY_MORE_ADJ; | goto yy_find_action; | } | break; | } | | default: | YY_FATAL_ERROR( | "fatal flex scanner internal error--no action found" ); | } /* end of action switch */ | } /* end of scanning one token */ | } /* end of yylex */ | | /* yy_get_next_buffer - try to read in a new buffer | * | * Returns a code representing an action: | * EOB_ACT_LAST_MATCH - | * EOB_ACT_CONTINUE_SCAN - continue scanning from current position | * EOB_ACT_END_OF_FILE - end of file | */ | static int yy_get_next_buffer (void) | { | register char *dest = YY_CURRENT_BUFFER_LVALUE->yy_ch_buf; | register char *source = (yytext_ptr); | register int number_to_move, i; | int ret_val; | | if ( (yy_c_buf_p) > &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars) + 1] ) | YY_FATAL_ERROR( | "fatal flex scanner internal error--end of buffer missed" ); | | if ( YY_CURRENT_BUFFER_LVALUE->yy_fill_buffer == 0 ) | { /* Don't try to fill the buffer, so this is an EOF. */ | if ( (yy_c_buf_p) - (yytext_ptr) - YY_MORE_ADJ == 1 ) | { | /* We matched a single character, the EOB, so | * treat this as a final EOF. | */ | return EOB_ACT_END_OF_FILE; | } | | else | { | /* We matched some text prior to the EOB, first | * process it. | */ | return EOB_ACT_LAST_MATCH; | } | } | | /* Try to read more data. */ | | /* First move last chars to start of buffer. */ | number_to_move = (int) ((yy_c_buf_p) - (yytext_ptr)) - 1; | | for ( i = 0; i < number_to_move; ++i ) | *(dest++) = *(source++); | | if ( YY_CURRENT_BUFFER_LVALUE->yy_buffer_status == YY_BUFFER_EOF_PENDING ) | /* don't do the read, it's not guaranteed to return an EOF, | * just force an EOF | */ | YY_CURRENT_BUFFER_LVALUE->yy_n_chars = (yy_n_chars) = 0; | | else | { | int num_to_read = | YY_CURRENT_BUFFER_LVALUE->yy_buf_size - number_to_move - 1; | | while ( num_to_read <= 0 ) | { /* Not enough room in the buffer - grow it. */ | | /* just a shorter name for the current buffer */ | YY_BUFFER_STATE b = YY_CURRENT_BUFFER; | | int yy_c_buf_p_offset = | (int) ((yy_c_buf_p) - b->yy_ch_buf); | | if ( b->yy_is_our_buffer ) | { | int new_size = b->yy_buf_size * 2; | | if ( new_size <= 0 ) | b->yy_buf_size += b->yy_buf_size / 8; | else | b->yy_buf_size *= 2; | | b->yy_ch_buf = (char *) | /* Include room in for 2 EOB chars. */ | yyrealloc((void *) b->yy_ch_buf,b->yy_buf_size + 2 ); | } | else | /* Can't grow it, we don't own it. */ | b->yy_ch_buf = 0; | | if ( ! b->yy_ch_buf ) | YY_FATAL_ERROR( | "fatal error - scanner input buffer overflow" ); | | (yy_c_buf_p) = &b->yy_ch_buf[yy_c_buf_p_offset]; | | num_to_read = YY_CURRENT_BUFFER_LVALUE->yy_buf_size - | number_to_move - 1; | | } | | if ( num_to_read > YY_READ_BUF_SIZE ) | num_to_read = YY_READ_BUF_SIZE; | | /* Read in more data. */ | YY_INPUT( (&YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[number_to_move]), | (yy_n_chars), num_to_read ); | | YY_CURRENT_BUFFER_LVALUE->yy_n_chars = (yy_n_chars); | } | | if ( (yy_n_chars) == 0 ) | { | if ( number_to_move == YY_MORE_ADJ ) | { | ret_val = EOB_ACT_END_OF_FILE; | yyrestart(yyin ); | } | | else | { | ret_val = EOB_ACT_LAST_MATCH; | YY_CURRENT_BUFFER_LVALUE->yy_buffer_status = | YY_BUFFER_EOF_PENDING; | } | } | | else | ret_val = EOB_ACT_CONTINUE_SCAN; | | (yy_n_chars) += number_to_move; | YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars)] = YY_END_OF_BUFFER_CHAR; | YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars) + 1] = YY_END_OF_BUFFER_CHAR; | | (yytext_ptr) = &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[0]; | | return ret_val; | } | | /* yy_get_previous_state - get the state just before the EOB char was reached */ | | static yy_state_type yy_get_previous_state (void) | { | register yy_state_type yy_current_state; | register char *yy_cp; | | yy_current_state = (yy_start); | | for ( yy_cp = (yytext_ptr) + YY_MORE_ADJ; yy_cp < (yy_c_buf_p); ++yy_cp ) | { | register YY_CHAR yy_c = (*yy_cp ? yy_ec[YY_SC_TO_UI(*yy_cp)] : 1); | if ( yy_accept[yy_current_state] ) | { | (yy_last_accepting_state) = yy_current_state; | (yy_last_accepting_cpos) = yy_cp; | } | while ( yy_chk[yy_base[yy_current_state] + yy_c] != yy_current_state ) | { | yy_current_state = (int) yy_def[yy_current_state]; | if ( yy_current_state >= 6 ) | yy_c = yy_meta[(unsigned int) yy_c]; | } | yy_current_state = yy_nxt[yy_base[yy_current_state] + (unsigned int) yy_c]; | } | | return yy_current_state; | } | | /* yy_try_NUL_trans - try to make a transition on the NUL character | * | * synopsis | * next_state = yy_try_NUL_trans( current_state ); | */ | static yy_state_type yy_try_NUL_trans (yy_state_type yy_current_state ) | { | register int yy_is_jam; | register char *yy_cp = (yy_c_buf_p); | | register YY_CHAR yy_c = 1; | if ( yy_accept[yy_current_state] ) | { | (yy_last_accepting_state) = yy_current_state; | (yy_last_accepting_cpos) = yy_cp; | } | while ( yy_chk[yy_base[yy_current_state] + yy_c] != yy_current_state ) | { | yy_current_state = (int) yy_def[yy_current_state]; | if ( yy_current_state >= 6 ) | yy_c = yy_meta[(unsigned int) yy_c]; | } | yy_current_state = yy_nxt[yy_base[yy_current_state] + (unsigned int) yy_c]; | yy_is_jam = (yy_current_state == 5); | | return yy_is_jam ? 0 : yy_current_state; | } | | static void yyunput (int c, register char * yy_bp ) | { | register char *yy_cp; | | yy_cp = (yy_c_buf_p); | | /* undo effects of setting up yytext */ | *yy_cp = (yy_hold_char); | | if ( yy_cp < YY_CURRENT_BUFFER_LVALUE->yy_ch_buf + 2 ) | { /* need to shift things up to make room */ | /* +2 for EOB chars. */ | register int number_to_move = (yy_n_chars) + 2; | register char *dest = &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[ | YY_CURRENT_BUFFER_LVALUE->yy_buf_size + 2]; | register char *source = | &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[number_to_move]; | | while ( source > YY_CURRENT_BUFFER_LVALUE->yy_ch_buf ) | *--dest = *--source; | | yy_cp += (int) (dest - source); | yy_bp += (int) (dest - source); | YY_CURRENT_BUFFER_LVALUE->yy_n_chars = | (yy_n_chars) = YY_CURRENT_BUFFER_LVALUE->yy_buf_size; | | if ( yy_cp < YY_CURRENT_BUFFER_LVALUE->yy_ch_buf + 2 ) | YY_FATAL_ERROR( "flex scanner push-back overflow" ); | } | | *--yy_cp = (char) c; | | (yytext_ptr) = yy_bp; | (yy_hold_char) = *yy_cp; | (yy_c_buf_p) = yy_cp; | } | | #ifndef YY_NO_INPUT | #ifdef __cplusplus | static int yyinput (void) | #else | static int input (void) | #endif | | { | int c; | | *(yy_c_buf_p) = (yy_hold_char); | | if ( *(yy_c_buf_p) == YY_END_OF_BUFFER_CHAR ) | { | /* yy_c_buf_p now points to the character we want to return. | * If this occurs *before* the EOB characters, then it's a | * valid NUL; if not, then we've hit the end of the buffer. | */ | if ( (yy_c_buf_p) < &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars)] ) | /* This was really a NUL. */ | *(yy_c_buf_p) = '\0'; | | else | { /* need more input */ | int offset = (yy_c_buf_p) - (yytext_ptr); | ++(yy_c_buf_p); | | switch ( yy_get_next_buffer( ) ) | { | case EOB_ACT_LAST_MATCH: | /* This happens because yy_g_n_b() | * sees that we've accumulated a | * token and flags that we need to | * try matching the token before | * proceeding. But for input(), | * there's no matching to consider. | * So convert the EOB_ACT_LAST_MATCH | * to EOB_ACT_END_OF_FILE. | */ | | /* Reset buffer status. */ | yyrestart(yyin ); | | /*FALLTHROUGH*/ | | case EOB_ACT_END_OF_FILE: | { | if ( yywrap( ) ) | return 0; | | if ( ! (yy_did_buffer_switch_on_eof) ) | YY_NEW_FILE; | #ifdef __cplusplus | return yyinput(); | #else | return input(); | #endif | } | | case EOB_ACT_CONTINUE_SCAN: | (yy_c_buf_p) = (yytext_ptr) + offset; | break; | } | } | } | | c = *(unsigned char *) (yy_c_buf_p); /* cast for 8-bit char's */ | *(yy_c_buf_p) = '\0'; /* preserve yytext */ | (yy_hold_char) = *++(yy_c_buf_p); | | return c; | } | #endif /* ifndef YY_NO_INPUT */ | | /** Immediately switch to a different input stream. | * @param input_file A readable stream. | * | * @note This function does not reset the start condition to @c INITIAL . | */ | void yyrestart (FILE * input_file ) | { | | if ( ! YY_CURRENT_BUFFER ){ | yyensure_buffer_stack (); | YY_CURRENT_BUFFER_LVALUE = | yy_create_buffer(yyin,YY_BUF_SIZE ); | } | | yy_init_buffer(YY_CURRENT_BUFFER,input_file ); | yy_load_buffer_state( ); | } | | /** Switch to a different input buffer. | * @param new_buffer The new input buffer. | * | */ | void yy_switch_to_buffer (YY_BUFFER_STATE new_buffer ) | { | | /* TODO. We should be able to replace this entire function body | * with | * yypop_buffer_state(); | * yypush_buffer_state(new_buffer); | */ | yyensure_buffer_stack (); | if ( YY_CURRENT_BUFFER == new_buffer ) | return; | | if ( YY_CURRENT_BUFFER ) | { | /* Flush out information for old buffer. */ | *(yy_c_buf_p) = (yy_hold_char); | YY_CURRENT_BUFFER_LVALUE->yy_buf_pos = (yy_c_buf_p); | YY_CURRENT_BUFFER_LVALUE->yy_n_chars = (yy_n_chars); | } | | YY_CURRENT_BUFFER_LVALUE = new_buffer; | yy_load_buffer_state( ); | | /* We don't actually know whether we did this switch during | * EOF (yywrap()) processing, but the only time this flag | * is looked at is after yywrap() is called, so it's safe | * to go ahead and always set it. | */ | (yy_did_buffer_switch_on_eof) = 1; | } | | static void yy_load_buffer_state (void) | { | (yy_n_chars) = YY_CURRENT_BUFFER_LVALUE->yy_n_chars; | (yytext_ptr) = (yy_c_buf_p) = YY_CURRENT_BUFFER_LVALUE->yy_buf_pos; | yyin = YY_CURRENT_BUFFER_LVALUE->yy_input_file; | (yy_hold_char) = *(yy_c_buf_p); | } | | /** Allocate and initialize an input buffer state. | * @param file A readable stream. | * @param size The character buffer size in bytes. When in doubt, use @c YY_BUF_SIZE. | * | * @return the allocated buffer state. | */ | YY_BUFFER_STATE yy_create_buffer (FILE * file, int size ) | { | YY_BUFFER_STATE b; | | b = (YY_BUFFER_STATE) yyalloc(sizeof( struct yy_buffer_state ) ); | if ( ! b ) | YY_FATAL_ERROR( "out of dynamic memory in yy_create_buffer()" ); | | b->yy_buf_size = size; | | /* yy_ch_buf has to be 2 characters longer than the size given because | * we need to put in 2 end-of-buffer characters. | */ | b->yy_ch_buf = (char *) yyalloc(b->yy_buf_size + 2 ); | if ( ! b->yy_ch_buf ) | YY_FATAL_ERROR( "out of dynamic memory in yy_create_buffer()" ); | | b->yy_is_our_buffer = 1; | | yy_init_buffer(b,file ); | | return b; | } | | /** Destroy the buffer. | * @param b a buffer created with yy_create_buffer() | * | */ | void yy_delete_buffer (YY_BUFFER_STATE b ) | { | | if ( ! b ) | return; | | if ( b == YY_CURRENT_BUFFER ) /* Not sure if we should pop here. */ | YY_CURRENT_BUFFER_LVALUE = (YY_BUFFER_STATE) 0; | | if ( b->yy_is_our_buffer ) | yyfree((void *) b->yy_ch_buf ); | | yyfree((void *) b ); | } | | #ifndef __cplusplus | extern int isatty (int ); | #endif /* __cplusplus */ | | /* Initializes or reinitializes a buffer. | * This function is sometimes called more than once on the same buffer, | * such as during a yyrestart() or at EOF. | */ | static void yy_init_buffer (YY_BUFFER_STATE b, FILE * file ) | | { | int oerrno = errno; | | yy_flush_buffer(b ); | | b->yy_input_file = file; | b->yy_fill_buffer = 1; | | /* If b is the current buffer, then yy_init_buffer was _probably_ | * called from yyrestart() or through yy_get_next_buffer. | * In that case, we don't want to reset the lineno or column. | */ | if (b != YY_CURRENT_BUFFER){ | b->yy_bs_lineno = 1; | b->yy_bs_column = 0; | } | | b->yy_is_interactive = file ? (isatty( fileno(file) ) > 0) : 0; | | errno = oerrno; | } | | /** Discard all buffered characters. On the next scan, YY_INPUT will be called. | * @param b the buffer state to be flushed, usually @c YY_CURRENT_BUFFER. | * | */ | void yy_flush_buffer (YY_BUFFER_STATE b ) | { | if ( ! b ) | return; | | b->yy_n_chars = 0; | | /* We always need two end-of-buffer characters. The first causes | * a transition to the end-of-buffer state. The second causes | * a jam in that state. | */ | b->yy_ch_buf[0] = YY_END_OF_BUFFER_CHAR; | b->yy_ch_buf[1] = YY_END_OF_BUFFER_CHAR; | | b->yy_buf_pos = &b->yy_ch_buf[0]; | | b->yy_at_bol = 1; | b->yy_buffer_status = YY_BUFFER_NEW; | | if ( b == YY_CURRENT_BUFFER ) | yy_load_buffer_state( ); | } | | /** Pushes the new state onto the stack. The new state becomes | * the current state. This function will allocate the stack | * if necessary. | * @param new_buffer The new state. | * | */ | void yypush_buffer_state (YY_BUFFER_STATE new_buffer ) | { | if (new_buffer == NULL) | return; | | yyensure_buffer_stack(); | | /* This block is copied from yy_switch_to_buffer. */ | if ( YY_CURRENT_BUFFER ) | { | /* Flush out information for old buffer. */ | *(yy_c_buf_p) = (yy_hold_char); | YY_CURRENT_BUFFER_LVALUE->yy_buf_pos = (yy_c_buf_p); | YY_CURRENT_BUFFER_LVALUE->yy_n_chars = (yy_n_chars); | } | | /* Only push if top exists. Otherwise, replace top. */ | if (YY_CURRENT_BUFFER) | (yy_buffer_stack_top)++; | YY_CURRENT_BUFFER_LVALUE = new_buffer; | | /* copied from yy_switch_to_buffer. */ | yy_load_buffer_state( ); | (yy_did_buffer_switch_on_eof) = 1; | } | | /** Removes and deletes the top of the stack, if present. | * The next element becomes the new top. | * | */ | void yypop_buffer_state (void) | { | if (!YY_CURRENT_BUFFER) | return; | | yy_delete_buffer(YY_CURRENT_BUFFER ); | YY_CURRENT_BUFFER_LVALUE = NULL; | if ((yy_buffer_stack_top) > 0) | --(yy_buffer_stack_top); | | if (YY_CURRENT_BUFFER) { | yy_load_buffer_state( ); | (yy_did_buffer_switch_on_eof) = 1; | } | } | | /* Allocates the stack if it does not exist. | * Guarantees space for at least one push. | */ | static void yyensure_buffer_stack (void) | { | int num_to_alloc; | | if (!(yy_buffer_stack)) { | | /* First allocation is just for 2 elements, since we don't know if this | * scanner will even need a stack. We use 2 instead of 1 to avoid an | * immediate realloc on the next call. | */ | num_to_alloc = 1; | (yy_buffer_stack) = (struct yy_buffer_state**)yyalloc | (num_to_alloc * sizeof(struct yy_buffer_state*) | ); | | memset((yy_buffer_stack), 0, num_to_alloc * sizeof(struct yy_buffer_state*)); | | (yy_buffer_stack_max) = num_to_alloc; | (yy_buffer_stack_top) = 0; | return; | } | | if ((yy_buffer_stack_top) >= ((yy_buffer_stack_max)) - 1){ | | /* Increase the buffer to prepare for a possible push. */ | int grow_size = 8 /* arbitrary grow size */; | | num_to_alloc = (yy_buffer_stack_max) + grow_size; | (yy_buffer_stack) = (struct yy_buffer_state**)yyrealloc | ((yy_buffer_stack), | num_to_alloc * sizeof(struct yy_buffer_state*) | ); | | /* zero only the new slots.*/ | memset((yy_buffer_stack) + (yy_buffer_stack_max), 0, grow_size * sizeof(struct yy_buffer_state*)); | (yy_buffer_stack_max) = num_to_alloc; | } | } | | /** Setup the input buffer state to scan directly from a user-specified character buffer. | * @param base the character buffer | * @param size the size in bytes of the character buffer | * | * @return the newly allocated buffer state object. | */ | YY_BUFFER_STATE yy_scan_buffer (char * base, yy_size_t size ) | { | YY_BUFFER_STATE b; | | if ( size < 2 || | base[size-2] != YY_END_OF_BUFFER_CHAR || | base[size-1] != YY_END_OF_BUFFER_CHAR ) | /* They forgot to leave room for the EOB's. */ | return 0; | | b = (YY_BUFFER_STATE) yyalloc(sizeof( struct yy_buffer_state ) ); | if ( ! b ) | YY_FATAL_ERROR( "out of dynamic memory in yy_scan_buffer()" ); | | b->yy_buf_size = size - 2; /* "- 2" to take care of EOB's */ | b->yy_buf_pos = b->yy_ch_buf = base; | b->yy_is_our_buffer = 0; | b->yy_input_file = 0; | b->yy_n_chars = b->yy_buf_size; | b->yy_is_interactive = 0; | b->yy_at_bol = 1; | b->yy_fill_buffer = 0; | b->yy_buffer_status = YY_BUFFER_NEW; | | yy_switch_to_buffer(b ); | | return b; | } | | /** Setup the input buffer state to scan a string. The next call to yylex() will | * scan from a @e copy of @a str. | * @param str a NUL-terminated string to scan | * | * @return the newly allocated buffer state object. | * @note If you want to scan bytes that may contain NUL values, then use | * yy_scan_bytes() instead. | */ | YY_BUFFER_STATE yy_scan_string (yyconst char * yystr ) | { | | return yy_scan_bytes(yystr,strlen(yystr) ); | } | | /** Setup the input buffer state to scan the given bytes. The next call to yylex() will | * scan from a @e copy of @a bytes. | * @param bytes the byte buffer to scan | * @param len the number of bytes in the buffer pointed to by @a bytes. | * | * @return the newly allocated buffer state object. | */ | YY_BUFFER_STATE yy_scan_bytes (yyconst char * yybytes, int _yybytes_len ) | { | YY_BUFFER_STATE b; | char *buf; | yy_size_t n; | int i; | | /* Get memory for full buffer, including space for trailing EOB's. */ | n = _yybytes_len + 2; | buf = (char *) yyalloc(n ); | if ( ! buf ) | YY_FATAL_ERROR( "out of dynamic memory in yy_scan_bytes()" ); | | for ( i = 0; i < _yybytes_len; ++i ) | buf[i] = yybytes[i]; | | buf[_yybytes_len] = buf[_yybytes_len+1] = YY_END_OF_BUFFER_CHAR; | | b = yy_scan_buffer(buf,n ); | if ( ! b ) | YY_FATAL_ERROR( "bad buffer in yy_scan_bytes()" ); | | /* It's okay to grow etc. this buffer, and we should throw it | * away when we're done. | */ | b->yy_is_our_buffer = 1; | | return b; | } | | #ifndef YY_EXIT_FAILURE | #define YY_EXIT_FAILURE 2 | #endif | | static void yy_fatal_error (yyconst char* msg ) | { | (void) fprintf( stderr, "%s\n", msg ); | exit( YY_EXIT_FAILURE ); | } | | /* Redefine yyless() so it works in section 3 code. */ | | #undef yyless | #define yyless(n) \ | do \ | { \ | /* Undo effects of setting up yytext. */ \ | int yyless_macro_arg = (n); \ | YY_LESS_LINENO(yyless_macro_arg);\ | yytext[yyleng] = (yy_hold_char); \ | (yy_c_buf_p) = yytext + yyless_macro_arg; \ | (yy_hold_char) = *(yy_c_buf_p); \ | *(yy_c_buf_p) = '\0'; \ | yyleng = yyless_macro_arg; \ | } \ | while ( 0 ) | | /* Accessor methods (get/set functions) to struct members. */ | | /** Get the current line number. | * | */ | int yyget_lineno (void) | { | | return yylineno; | } | | /** Get the input stream. | * | */ | FILE *yyget_in (void) | { | return yyin; | } | | /** Get the output stream. | * | */ | FILE *yyget_out (void) | { | return yyout; | } | | /** Get the length of the current token. | * | */ | int yyget_leng (void) | { | return yyleng; | } | | /** Get the current token. | * | */ | | char *yyget_text (void) | { | return yytext; | } | | /** Set the current line number. | * @param line_number | * | */ | void yyset_lineno (int line_number ) | { | | yylineno = line_number; | } | | /** Set the input stream. This does not discard the current | * input buffer. | * @param in_str A readable stream. | * | * @see yy_switch_to_buffer | */ | void yyset_in (FILE * in_str ) | { | yyin = in_str ; | } | | void yyset_out (FILE * out_str ) | { | yyout = out_str ; | } | | int yyget_debug (void) | { | return yy_flex_debug; | } | | void yyset_debug (int bdebug ) | { | yy_flex_debug = bdebug ; | } | | static int yy_init_globals (void) | { | /* Initialization is the same as for the non-reentrant scanner. | * This function is called from yylex_destroy(), so don't allocate here. | */ | | (yy_buffer_stack) = 0; | (yy_buffer_stack_top) = 0; | (yy_buffer_stack_max) = 0; | (yy_c_buf_p) = (char *) 0; | (yy_init) = 0; | (yy_start) = 0; | | /* Defined in main.c */ | #ifdef YY_STDINIT | yyin = stdin; | yyout = stdout; | #else | yyin = (FILE *) 0; | yyout = (FILE *) 0; | #endif | | /* For future reference: Set errno on error, since we are called by | * yylex_init() | */ | return 0; | } | | /* yylex_destroy is for both reentrant and non-reentrant scanners. */ | int yylex_destroy (void) | { | | /* Pop the buffer stack, destroying each element. */ | while(YY_CURRENT_BUFFER){ | yy_delete_buffer(YY_CURRENT_BUFFER ); | YY_CURRENT_BUFFER_LVALUE = NULL; | yypop_buffer_state(); | } | | /* Destroy the stack itself. */ | yyfree((yy_buffer_stack) ); | (yy_buffer_stack) = NULL; | | /* Reset the globals. This is important in a non-reentrant scanner so the next time | * yylex() is called, initialization will occur. */ | yy_init_globals( ); | | return 0; | } | | /* | * Internal utility routines. | */ | | #ifndef yytext_ptr | static void yy_flex_strncpy (char* s1, yyconst char * s2, int n ) | { | register int i; | for ( i = 0; i < n; ++i ) | s1[i] = s2[i]; | } | #endif | | #ifdef YY_NEED_STRLEN | static int yy_flex_strlen (yyconst char * s ) | { | register int n; | for ( n = 0; s[n]; ++n ) | ; | | return n; | } | #endif | | void *yyalloc (yy_size_t size ) | { | return (void *) malloc( size ); | } | | void *yyrealloc (void * ptr, yy_size_t size ) | { | /* The cast to (char *) in the following accommodates both | * implementations that use char* generic pointers, and those | * that use void* generic pointers. It works with the latter | * because both ANSI C and C++ allow castless assignment from | * any pointer type to void*, and deal with argument conversions | * as though doing an assignment. | */ | return (void *) realloc( (char *) ptr, size ); | } | | void yyfree (void * ptr ) | { | free( (char *) ptr ); /* see yyrealloc() for (char *) cast */ | } | | #define YYTABLES_NAME "yytables" | | #line 2 "conftest.l" | | | | extern char *yytext; configure:4865: result: no configure:4889: checking for a BSD-compatible install configure:4944: result: /usr/bin/install -c configure:4996: checking for ranlib configure:5012: found /usr/bin/ranlib configure:5023: result: ranlib configure:5039: checking for bison configure:5055: found /usr/bin/bison configure:5065: result: bison -y configure:5120: checking for ranlib configure:5146: result: ranlib configure:5199: checking for strip configure:5215: found /usr/bin/strip configure:5225: result: strip configure:5278: checking for ar configure:5294: found /usr/bin/ar configure:5304: result: ar configure:5357: checking for ld configure:5373: found /usr/bin/ld configure:5383: result: ld configure:5635: checking for zlib >= 1.1.4 configure:5753: gcc -o conftest -arch ppc -arch i386 -isysroot /Developer/SDKs/MacOSX10.4u.sdk -no-cpp-precomp -D_INTL_REDIRECT_MACROS -DNOPCH -L/usr/lib -L/lib -bind_at_load conftest.c -lz >&5 conftest.c: In function 'main': conftest.c:22: warning: initialization discards qualifiers from pointer target type conftest.c: In function 'main': conftest.c:22: warning: initialization discards qualifiers from pointer target type ld: library not found for -lcrt1.10.5.o collect2: ld returned 1 exit status ld: library not found for -lcrt1.10.5.o collect2: ld returned 1 exit status lipo: can't open input file: /var/folders/S9/S97oLIIrFR0LyKKUzS3t7E+++TI/-Tmp-//ccpwTeXm.out (No such file or directory) configure:5756: $? = 1 configure: program exited with status 1 configure: failed program was: | | /* confdefs.h. */ | | #define PACKAGE_NAME "aMule" | #define PACKAGE_TARNAME "amule" | #define PACKAGE_VERSION "SVN" | #define PACKAGE_STRING "aMule SVN" | #define PACKAGE_BUGREPORT "admin@amule.org" | #define PACKAGE "amule" | #define VERSION "SVN" | #ifdef __cplusplus | extern "C" void std::exit (int); using std::exit; | #endif | /* end confdefs.h. */ | | #include | #include | | int | main () | { | char *zver = zlibVersion(); | FILE *f=fopen("conftestval", "w"); | if (!f) return 1; | fprintf(f, "%s", | zver[0] > '1' || | (zver[0] == '1' && | (zver[2] > '1' || | (zver[2] == '1' && | zver[4] >= '4'))) ? "yes" : "no"); | fclose(f); | f=fopen("conftestver", "w"); | if (f) { | fprintf(f, "%s", ZLIB_VERSION); | fclose(f); | } | | ; | return 0; | } | configure:5788: result: no configure:5803: error: zlib >= 1.1.4 is required for aMule ## ---------------- ## ## Cache variables. ## ## ---------------- ## ac_cv_build=i686-apple-darwin9.2.2 ac_cv_build_alias=i686-apple-darwin9.2.2 ac_cv_c_compiler_gnu=yes ac_cv_cxx_compiler_gnu=yes ac_cv_env_CC_set= ac_cv_env_CC_value= ac_cv_env_CFLAGS_set=set ac_cv_env_CFLAGS_value='-arch ppc -arch i386 -isysroot /Developer/SDKs/MacOSX10.4u.sdk' ac_cv_env_CPPFLAGS_set= ac_cv_env_CPPFLAGS_value= ac_cv_env_CPP_set= ac_cv_env_CPP_value= ac_cv_env_CXXCPP_set= ac_cv_env_CXXCPP_value= ac_cv_env_CXXFLAGS_set=set ac_cv_env_CXXFLAGS_value='-arch ppc -arch i386 -isysroot /Developer/SDKs/MacOSX10.5.sdk' ac_cv_env_CXX_set= ac_cv_env_CXX_value= ac_cv_env_LDFLAGS_set=set ac_cv_env_LDFLAGS_value='-L/usr/lib -L/lib' ac_cv_env_RC_set= ac_cv_env_RC_value= ac_cv_env_build_alias_set= ac_cv_env_build_alias_value= ac_cv_env_host_alias_set= ac_cv_env_host_alias_value= ac_cv_env_target_alias_set= ac_cv_env_target_alias_value= ac_cv_exeext= ac_cv_host=i686-apple-darwin9.2.2 ac_cv_host_alias=i686-apple-darwin9.2.2 ac_cv_lib_fl_yywrap=no ac_cv_lib_l_yywrap=no ac_cv_objext=o ac_cv_path_install='/usr/bin/install -c' ac_cv_prog_AWK=awk ac_cv_prog_CPP='gcc -E' ac_cv_prog_CXXCPP='g++ -E' ac_cv_prog_LEX=flex ac_cv_prog_YACC='bison -y' ac_cv_prog_ac_ct_AR=ar ac_cv_prog_ac_ct_CC=gcc ac_cv_prog_ac_ct_CXX=g++ ac_cv_prog_ac_ct_LD=ld ac_cv_prog_ac_ct_RANLIB=ranlib ac_cv_prog_ac_ct_STRIP=strip ac_cv_prog_cc_g=yes ac_cv_prog_cc_stdc= ac_cv_prog_cxx_g=yes ac_cv_prog_egrep='grep -E' ac_cv_prog_lex_root=lex.yy ac_cv_prog_lex_yytext_pointer=no ac_cv_prog_make_make_set=yes am_cv_CC_dependencies_compiler_type=none am_cv_CXX_dependencies_compiler_type=none ## ----------------- ## ## Output variables. ## ## ----------------- ## ACLOCAL='${SHELL} /Developer/sourcecode/amule-cvs/missing --run aclocal-1.9' ALCC_FALSE='' ALCC_MANPAGES='' ALCC_TRUE='' ALC_FALSE='' ALC_MANPAGES='' ALC_TRUE='' ALLOCA='' AMDEPBACKSLASH='' AMDEP_FALSE='' AMDEP_TRUE='#' AMTAR='${SHELL} /Developer/sourcecode/amule-cvs/missing --run tar' AMULECMD_MANPAGES='' AMULEWEB_DEFS='' AMULE_DAEMON_FALSE='' AMULE_DAEMON_MANPAGES='' AMULE_DAEMON_TRUE='' AMULE_GUI_FALSE='' AMULE_GUI_MANPAGES='' AMULE_GUI_TRUE='' AR='ar' AUTOCONF='${SHELL} /Developer/sourcecode/amule-cvs/missing --run autoconf' AUTOHEADER='${SHELL} /Developer/sourcecode/amule-cvs/missing --run autoheader' AUTOMAKE='${SHELL} /Developer/sourcecode/amule-cvs/missing --run automake-1.9' AWK='awk' BFD_FLAGS='' BFD_LIB='' BUILD_CC='gcc' BUILD_CFLAGS='' BUILD_CPPFLAGS='' BUILD_EXEEXT='' BUILD_INCLUDED_LIBINTL='' BUILD_LDFLAGS='' CAS_DEFS='' CAS_FALSE='' CAS_MANPAGES='' CAS_TRUE='' CATOBJEXT='' CC='gcc' CCACHE='' CCDEPMODE='depmode=none' CFLAGS='-arch ppc -arch i386 -isysroot /Developer/SDKs/MacOSX10.4u.sdk -no-cpp-precomp -D_INTL_REDIRECT_MACROS -DNOPCH' COMPILE_CMD_FALSE='' COMPILE_CMD_TRUE='' COMPILE_NLS_FALSE='' COMPILE_NLS_TRUE='' CPP='gcc -E' CPPFLAGS='' CRYPTOLIBS='' CRYPTO_PP_CXXFLAGS='' CRYPTO_PP_INCLUDE_PREFIX='' CRYPTO_PP_LDFLAGS='' CRYPTO_PP_LIB_NAME='' CRYPTO_PP_PREFIX='' CRYPTO_PP_STYLE='' CRYPTO_PP_VERSION_NUMBER='' CRYPTO_PP_VERSION_STRING='' CXX='g++' CXXCPP='g++ -E' CXXDEPMODE='depmode=none' CXXFLAGS='-arch ppc -arch i386 -isysroot /Developer/SDKs/MacOSX10.5.sdk' CYGPATH_W='echo' DATADIRNAME='' DEFS='' DEPDIR='.deps' ECHO_C='' ECHO_N='-n' ECHO_T='' ED2K_FALSE='' ED2K_MANPAGES='' ED2K_TRUE='' EGREP='grep -E' ENABLE_IP2COUNTRY_FALSE='' ENABLE_IP2COUNTRY_TRUE='' ENABLE_UPNP_FALSE='' ENABLE_UPNP_TRUE='' EXEEXT='' EXEEXT='' GDLIB_CFLAGS='' GDLIB_CONFIG_PATH='' GDLIB_LDFLAGS='' GDLIB_LIBS='' GENCAT='' GENERATE_FLEX_HEADER_FALSE='' GENERATE_FLEX_HEADER_TRUE='' GEOIP_INCLUDE='' GEOIP_LIB='' GLIBC21='' GMSGFMT='' HAVE_FLEX_EXTENDED='' HAVE_GETTEXT='' INSTALL_DATA='${INSTALL} -m 644' INSTALL_PROGRAM='${INSTALL}' INSTALL_SCRIPT='${INSTALL}' INSTALL_STRIP_PROGRAM='${SHELL} $(install_sh) -c -s' INSTOBJEXT='' INTLBISON='' INTLLIBS='' INTLOBJS='' INTL_LIBTOOL_SUFFIX_PREFIX='' LD='ld' LDFLAGS='-L/usr/lib -L/lib -bind_at_load' LEX='flex' LEXLIB='' LEX_OUTPUT_ROOT='lex.yy' LIBICONV='' LIBINTL='' LIBOBJS='' LIBPNG_CFLAGS='' LIBPNG_CONFIG_PATH='' LIBPNG_CXXFLAGS='' LIBPNG_LDFLAGS='' LIBPNG_LIBS='' LIBS='' LTLIBICONV='' LTLIBINTL='' LTLIBOBJS='' MAINT='#' MAINTAINER_MODE_FALSE='' MAINTAINER_MODE_TRUE='#' MAKEINFO='${SHELL} /Developer/sourcecode/amule-cvs/missing --run makeinfo' MKINSTALLDIRS='' MONOLITHIC_FALSE='' MONOLITHIC_MANPAGES='' MONOLITHIC_TRUE='' MSGFMT='' MSGMERGE='' NEED_CORESERVICES_FALSE='' NEED_CORESERVICES_TRUE='' NEED_RC_FALSE='' NEED_RC_TRUE='' OBJEXT='o' PACKAGE='amule' PACKAGE_BUGREPORT='admin@amule.org' PACKAGE_NAME='aMule' PACKAGE_STRING='aMule SVN' PACKAGE_TARNAME='amule' PACKAGE_VERSION='SVN' PATH_SEPARATOR=':' POSUB='' POW_LIB='' RANLIB='ranlib' RC='' RCFLAGS='' READLINE_LIBS='' REGEX_LIB='' RESOLV_LIB='' SET_MAKE='' SHELL='/bin/sh' STRIP='strip' SVNDATE='' SYS_WIN32_FALSE='' SYS_WIN32_TRUE='' USE_INCLUDED_LIBINTL='' USE_NLS='' VERSION='SVN' WEB_FALSE='' WEB_MANPAGES='' WEB_TRUE='' WXBASE_CFLAGS='' WXBASE_CXXFLAGS='' WXBASE_LIBS='' WXCAS_FALSE='' WXCAS_MANPAGES='' WXCAS_TRUE='' WX_CFLAGS='' WX_CFLAGS_ONLY='' WX_CONFIG_PATH='' WX_CPPFLAGS='' WX_CXXFLAGS='' WX_CXXFLAGS_ONLY='' WX_DEBUG='' WX_LIBS='' WX_LIBS_STATIC='' WX_PORT='' WX_RESCOMP='' WX_SHARED='' WX_UNICODE='' WX_VERSION_FULL='' WX_VERSION_MAJOR='' WX_VERSION_MINOR='' X11LIBS='' XGETTEXT='' YACC='bison -y' ac_ct_AR='ar' ac_ct_BUILD_CC='' ac_ct_CC='gcc' ac_ct_CXX='g++' ac_ct_LD='ld' ac_ct_RANLIB='ranlib' ac_ct_RC='' ac_ct_STRIP='strip' am__fastdepCC_FALSE='' am__fastdepCC_TRUE='#' am__fastdepCXX_FALSE='' am__fastdepCXX_TRUE='#' am__include='include' am__leading_dot='.' am__quote='' am__tar='${AMTAR} chof - "$$tardir"' am__untar='${AMTAR} xf -' bindir='${exec_prefix}/bin' build='i686-apple-darwin9.2.2' build_alias='' build_cpu='i686' build_os='darwin9.2.2' build_vendor='apple' ccache='no' ccache_prefix='' datadir='${prefix}/share' docdir='' exec_prefix='NONE' host='i686-apple-darwin9.2.2' host_alias='' host_cpu='i686' host_os='darwin9.2.2' host_vendor='apple' includedir='${prefix}/include' infodir='${prefix}/info' install_sh='/Developer/sourcecode/amule-cvs/install-sh' libdir='${exec_prefix}/lib' libexecdir='${exec_prefix}/libexec' localstatedir='${prefix}/var' mandir='${prefix}/man' mkdir_p='$(mkinstalldirs)' oldincludedir='/usr/include' prefix='NONE' program_transform_name='s,x,x,' sbindir='${exec_prefix}/sbin' sharedstatedir='${prefix}/com' sysconfdir='${prefix}/etc' target_alias='' ## ----------- ## ## confdefs.h. ## ## ----------- ## #define PACKAGE "amule" #define PACKAGE_BUGREPORT "admin@amule.org" #define PACKAGE_NAME "aMule" #define PACKAGE_STRING "aMule SVN" #define PACKAGE_TARNAME "amule" #define PACKAGE_VERSION "SVN" #define VERSION "SVN" #endif #ifdef __cplusplus extern "C" void std::exit (int); using std::exit; configure: exit 1